LC Automation
Call LC Automation on 01254 685900 +44 (0)1254 685900 E-mail LC Automation

Power Feed Modules

Power Feed Modules
  List Price (ex VAT): £90.36  
  Stock On Back Order  
  Order Code: KFD2EB2  
  Manufacturer Code: 189783  

Out Of Stock? You Can Still Place Your Order.



Datasheet Open pdf document in new window

Product details

Intrinsic safety & signal conditioning

Power feed module

For use with KFD2 20mm barrier units only

The power feed module interfaces 24V d.c. power to the Power Rail at a maximum current of 4A. The twin input terminals allow for daisy-chaining of supply (max. 10A).

A green LED on the front of the unit indicates that power is on, and a red LED illuminates during error conditions. In the event of a field wiring or barrier fault from any barrier on the Power Rail, the integral collective error messaging relay alerts the controller via a single discrete I/O point.

This relay can be configured as normally open or normally closed.

In the sense of functional safety (SIL) the device provides no dangerous failures. Thereby the safe condition of the supplied barrier must be defined as the powerless state. The device will not influence the safety calculation or the SIL value.

This device is compatible with all versions of the Power Rail.

Technical specification
Connection:Terminals 11+, 12-
Terminals 8+, 9-
Rated voltage Un:20-30V d.c.*
Power loss:≤1W
Power Rail feed output current:≤4A
Energized/De-energized delay:Approx. 20ms/approx. 20ms
Ambient temperature:-25 to +60°C (-13 ... 140 °F)
Protection rating:IP20
Dimensions:h20 x w119 x d115mm
Mounting:35mm DIN mounting rail acc. to
EN 60715:2001

*The maximum rated operating voltage of the devices plugged onto the Power Rail must not be exceeded.

  • Interface for Power Rail
  • Supply rating 4A, external fused
  • Relay contact output, reversible
  • LED status indication