|
|
|
KFD2EB2 Power Feed Modules
|
| |
List Price (ex VAT): |
£90.36 |
|
| |
|
In stock |
|
| |
Order Code: |
KFD2EB2 |
|
| |
Manufacturer Code: |
189783 |
|
| |
|
|
|
Out Of Stock? You Can Still Place Your Order. |
| |
| |
| |
| | | | |
|
|
Documentation:
Datasheet
|
Product details
Intrinsic safety & signal conditioning
Power feed module
For use with KFD2 20mm barrier units only
The power feed module interfaces 24V d.c. power to the Power Rail at a maximum current of 4A. The twin input terminals allow for daisy-chaining of supply (max. 10A).
A green LED on the front of the unit indicates that power is on, and a red LED illuminates during error conditions. In the event of a field wiring or barrier fault from any barrier on the Power Rail, the integral collective error messaging relay alerts the controller via a single discrete I/O point.
This relay can be configured as normally open or normally closed.
In the sense of functional safety (SIL) the device provides no dangerous failures. Thereby the safe condition of the supplied barrier must be defined as the powerless state. The device will not influence the safety calculation or the SIL value.
This device is compatible with all versions of the Power Rail.
Technical specification
| | Connection: | Terminals 11+, 12-
| | Terminals 8+, 9-
| | Rated voltage Un: | 20-30V d.c.*
| | Power loss: | ≤1W
| | Power Rail feed output current: | ≤4A
| | Energized/De-energized delay: | Approx. 20ms/approx. 20ms
| | Ambient temperature: | -25 to +60°C (-13 ... 140 °F)
| | Protection rating: | IP20
| | Dimensions: | h20 x w119 x d115mm
| | Mounting: | 35mm DIN mounting rail acc. to
| | EN 60715:2001 |
*The maximum rated operating voltage of the devices plugged onto the Power Rail must not be exceeded.
Features:
Interface for Power Rail
Supply rating 4A, external fused
Relay contact output, reversible
LED status indication
|
|
|
|
|
|
|
|
|
|
|
|
|
