IAI Modular Controllers -
The R-Series is Now Complete!
With the new program type RSEL controller for the connection of up to 8 actuators and the REC controller for up to 16 EleCylinder actuators, together with the positioner type RCON controller, the R-series is now complete.
This series of unit-connecting controllers with identical connections allows you to freely select and combine connected actuators and control methods, saving space on the control panel.
At A Glance
- Simultaneous operations of up to 8 axes
- Different types of drivers can be combined thanks to the unit-linkage system
- Driver unit can be shared with RCON
- Supports control of cartesian type 6-axis robots
- Possible to register positioning points up to 36,000
- Supports battery-less absolute encoder, simple but abso unit, incremental-encoder
and quasi-abso encoder
Seven High Performance Functions Only From IAI
- Compatibility - 7 field networks supported
- Temperatures - supported at 0 to 55°C
- Predictive and preventative maintenance
- Ethernet-equipped
- Connection actuators - 947 IAI actuators ca be connected
- Motor power cutoff method can be selected
- Helps visualise equipment with 24V power monitor
IAI Controllers Support A Variety Of Different Combinations
Combine a driver unit with the exact number of required axes for a more compact controller and reduced installation space. This allows for mixed control of an actuator with both a 24V motor and 230V motor.
The system can be changed just by switching out the master unit based on the control method. This allows the same driver units to be used.
RSEL Controller For Up To 16 Actuators (with an REC Controller)
Up to 8 axes can be connected to the RSEL controller and, in conjunction with the REC controller, in total 16 actuators. It supports both linear and arc interpolation operations. It also allows control of connected axes to be split into two groups. The space required for the control panel is up to 67% less compared to previous IAI models (2 MSEL controller with 4 actuators each), where a 4-axis actuator is connected to a single driver unit. The costs are reduced by approximately 44%.
The RCON Controller
The RCON system for up to 16 axes is equipped with modular connection units and is therefore flexibly expandable. Simply combine a driver unit with the number of axes required. In doing so, you save up to 85% of the required space in the control panel compared to models where a single axis is connected to a single control unit.
REC - Connect EleCylinder To A Field Network
This field network connection unit is specifically for use with EleCylinder. It allows up to 16 axes to be connected. It is ideal for saving both wiring and space inside the control panel.
EC Connection Unit Can Be Connected With Other Driver Units Connected to RCON or RSEL
EleCylinder can be used together with RoboCylinder actuators and IntelligentActuator single-axis robots when it is connected to the EC connecting unit.
|